Nitrogen Generation for Laser Cutting: On-demand or high-pressure storage systems?
When evaluating system design, two design philosophies are highly beneficial for laser cutting operations; on-demand generation and high-pressure storage systems. The on-demand system boosts the nitrogen pressure slightly above the operating pressure of the laser, and the high-pressure storage system will boost the nitrogen pressure well above the operating pressure of the laser (typically 4,500psi) […]
Modular Nitrogen Generators Replace Twin Tower For a Win
In 2017 we were connected with a multi-national food and beverage producer who had been using nitrogen generation for 15 years (yes, 15 years! An early adopter and way ahead of the curve!). The system was approaching the end of its life and would soon require replacement. Rarely do we get the chance to work […]
Sizing Nitrogen Generation Systems for Laser Cutting
Many laser systems will state that the nitrogen purge gas requirement is 99.999% or 5.0 UHP (Ultra High Purity) as a catchall specification, but it is seldom required. The majority of systems that we have put in the field vary from 95% to 99.99% purity. The overall cost of purchasing and building a nitrogen generation […]
Modular Nitrogen Generation Supports Effortless Expansion
Read here on how Purity Gas successfully applied a dynamic approach on system design…And, check out the slider to see the system expand before your very eyes!
Revisiting The Costs of Nitrogen gas
Four years ago, we released a blog outlining the costs of nitrogen gas highlighting that companies across Canada are paying exceptional rates to have nitrogen gas delivered to their facility by a third party. It has since become one of the most visited pages on our website, and it’s time we revisit the topic with […]
Buying a Nitrogen Generation System?
Now presumably, if you are reading this, you have already determined that onsite nitrogen generation is a viable move for your operation. Purchasing any equipment is a task that should be dealt with carefully, and with diligence.
Nitrogen Generation for Boiler Layup
Proper boiler layup and applying nitrogen gas to the process can help reduce or eliminate corrosion and oxygen pitting of the heat recovery steam generator. Nitrogen gas generation offers a tailored solution to the application and can provide substantial savings for both existing nitrogen users, and also non users seeking optimum conditions for boiler layup.
A Sustainable Solution But What Could Go Wrong?
There may be misconceptions and perceived downfalls of nitrogen generation but truthfully, nitrogen generation is a sustainable solution to the realities we face in the world today. The overall process is very simple and is therefore very reliable; there are no moving parts, no motors and there are no harmful byproducts.
Nitrogen Generation System Design: The Keys to Success
Is your company purchasing nitrogen gas at 99.999% purity and you’re not sure why? Well, you’re not alone! This is where the importance of nitrogen generation system design comes into play. While there are many applications which do require nitrogen gas concentrated to 99.999%, they are significantly outweighed by the applications that don’t.
Air Quality in Nitrogen Generation: Why It’s Important
The quality of air for any application that uses compressed air is very important. The lifecycle of the Carbon Molecular Sieve or CMS in our nitrogen generators is entirely contingent on clean and dry air. Compressed air contains substances such as dust, oil & water. These substances can be removed by having the appropriate filtration […]