Item # 99029
Our Air Check O2 sample draw monitor is a specialized version of our oxygen deficiency monitor perfect for situations where the monitor cannot physically be in the concerning area. The monitor can reside up to 100ft away from the area to be tested and uses a polyurethane or equivalent 1/4 inch tube to draw the sample. For a sterile environment, this monitor is the solution. This has a 10+ year zirconium oxide sensor.
- 10 + Years No Calibration Sensor
- Two-Alarm Relays for 19.5% and 18.0%
- No Maintenance Required
- 3 Year Warranty
- Digital Display, 4-20mA Analog Output
- No drift due to thunderstorms or barometric pressure changes
- Wall mounting brackets and optional plug-in wall power supply
- Built-in Flow Sample Pump
- UL, C UL and CE Approvals
Long Lasting Zirconium Sensor
As a leading manufacturer of oxygen monitors, PureAire Monitoring Systems puts performance, reliability, and affordability first. Our oxygen monitors last for 10+ years with no replacement, no maintenance, and no hidden costs.
These monitors work well anywhere gas leaks would cause oxygen depletion, including in laboratories, cryogenics chambers, hyperbaric chambers, and freezers. Our monitors have a long-lasting zirconium oxide sensor, which delivers reliable monitoring against leaks of argon, helium, and nitrogen for 10 years. The device has its own audible and visual alarm, but it can be connected to fire alarm systems to amplify the reach.
The O2 monitor is easy to set up, easy to operate, and requires no calibration once installed. Supervised watchdog software checks that everything is working properly and notifies you of any inconsistencies on the monitor. Immune to performance changes from barometric pressure drops, humidity, and temperature, these monitors are reliable and cost-effective.
|Sampling Method||Sample Draw|
|Gases Detected||Oxygen (O2)|
|Range||0 – 25 %|
|Accuracy||± 1 % of Full Scale|
|Operating Temperature||-40 to +55 ºC|
|Display||3/4″ LCD Digital Display, Back Lit|
|Sensor Type||Long life zirconium oxide sensor cell|
|Sensor Life||> 10 years under Normal Conditions|
|Signal Outputs||4-20 mA Analog Output|
Dual Level Alarm Relay Contacts
Built in Horn
|Power Requirements||24 VDC 300 mA|
|Width|| 7.25 in|
No Zero or Span Pot Adjustment Required
|Optional||Available without Horn. Contact PureAire for details.|
1 Not intended for explosive atmospheres
Connects to Distributive Control Systems and Programmable Logic Controllers
The Air Check O2 Sample Draw Monitor can be used with PureAire’s proprietary controllers, either single or multichannel. Dual selectable alarm relays set off strobe lights and remote horns, so that staff can learn of the hazard. Individuals can operate the oxygen monitors remotely by as much as 1,000 meters or 0.6 miles from the centralized control systems.
Better Oxygen Sensor Cell
Unlike other oxygen monitors, PureAire’s Air Check O2 Deficiency Monitor relies upon a Current Limiting Zirconium Oxide Oxygen sensor. This sensor does not need a reference gas and can perform reliably in environments that contain 100 percent nitrogen. The sensitive monitor can tell oxygen levels by percentages, so it can operate in lower-temperature environments than the more frequently used concentration-type cells. The improved cell helps PureAire sensor’s last for 10+ years.
Once set up, the Air Check O2 Deficiency Monitor performs reliably with no concentration. The earth provides natural calibrated oxygen, which keeps the O2 monitor challenged to 10.9 percent. Enjoy consistent oxygen monitoring with no adjustments. For peace of mind, test the unit’s response by subjecting the system to nitrogen periodically.
O2 Monitor System Features
PureAire offers its Air Check O2 Deficiency Monitor in multiple configurations. Every unit comes with a choice of low-cost basic display monitor or full featured, dual level monitor with user selectable alarm relays. When built-in alarm relays are used, the sensor continuously monitors electronics, sensors cell, and sample flows. Any faulty information is provided to the front panel LED, mA output, and alarm relay, for instant notification.